Expanded PTFE Valve Stem Packing
Expanded PTFE Valve Stem Packing is made from 100% white pure virgin PTFE resin. It is a white, soft and round product. In possession of the characteristics of high tensile strength, self-lubrication, low coefficient of friction and corrosion resistance, it can be widely used in valves, faucet stems, rotating shafts, reciprocating plungers, stuffing boxes and flanges etc.
Send Inquiry
Product Description
Expanded PTFE Valve Stem Packing
Expanded PTFE Valve Stem Packing is made from 100% white pure virgin PTFE resin. It is a white, soft and round product. In possession of the characteristics of high tensile strength, self-lubrication, low coefficient of friction and corrosion resistance, it can be widely used in valves, faucet stems, rotating shafts, reciprocating plungers, stuffing boxes and flanges etc.
Advantage:
• Easy installation,cheap cost.
• High temperature resistance, long service life.
• Ideal for valves, faucet stems, rotating shafts
• No pollution for fluid.
• Chemical corrosion resistance.
• Excellent flexibility,few cold flow deformation.
• Clean, from dust-free workshop.
Properties:
| Work Temperature | -268～280℃,Melt327℃ | ASTM D 4895 |
| Work Pressure | ≤8Mpa Liquid | JIS K 6891 |
| Work Medium |
Except molten metal, liquid and gas of fluorine Meet（FDA21 CFR177.1550) |
|
| Tensile Strength | ≤10 MPA | JIS K 6891 |
| Bolt Pressure | 8-20Mpa（3-25mmWidth） | |
| Density | 0．7~0.85g/cm3 | ASTM D 4895 |
| Elongation | ≥20% | |
| Compressibility | ≤40% | ASTM F-38 |
| Volatility | ≤1.0% | JIS K 6892 |
| Recovery | ≥16% | ASTM F-36 |
|
Creep Relaxation（ASTM F38） |
≤40% | |
| Hardness | 30-70HA | |
| PH | 0-14 | |
| Moisture Content | ≤0.01% | ASTM D 4895 |
| Hot Unstability | 10 | |
| Ave Granule Dia | 500um | ASTM D 4895 |
Specification:
Diameter from 1-20mm×L (design by you)
| Specification | Standard Length:5-100m/roll |
| Dia(mm) | Dia(mm) |
| 1 | 11 |
| 2 | 12 |
| 3 | 13 |
| 4 | 14 |
| 5 | 15 |
| 6 | 16 |
| 7 | 17 |
| 8 | 18 |
| 9 | 19 |
| 10 |
20 |
